fortino large


Project Overview

Shumaker Consulting, Engineering and Land Surveying, D.P.C. (SCE) was responsible for the design of infrastructure, environmental permitting, and construction assistance tasks required to support a waste tire remediation project at an existing tire pile site in the Town of West Monroe, NY. This tire pile is estimated to contain approximately 10 million scrap tires.

Project Start Date7/29/2001

Project End5/1/2013


Project Description

SCE personnel performed all survey services including: photogrammetric control; primary project control using GPS technology and methodology; ROW and boundary survey; digital terrain modeling; utility and drainage surveys; wetland surveys.

Digital mapping was developed in ACAD/LDD file format and NYSOGS-specified CADD configuration, including DTM, planimetrics, topography, overhead and underground utilities, drainage, and boundary/ROW determination.

Major elements of the infrastructure design included: access roadways, scale facilities, shredding facilities, wastewater management, stormwater management, shred storage, shred washing, and shred load-out facilities. These facilities were designed to remove and shred tires into an acceptable civil engineering product (embankment fill), while also addressing the mitigation and remediation of environmental and life safety issues on site.

The fundamental complexity of this unusual assignment was intensified by existing conditions at the Fortino site, such as the extensive, classified wetlands that enveloped the waste pile and limited access to the project area caused by localized flooding produced by beaver native to the project area. Further constraints on the project design were imposed by a disarming array of public health and life safety issues, not least the imminent security threat presented by arson and an ecologically catastrophic pile fire; the activity of disease vectors, such as mosquitoes or other types of vermin; or the environmental degradation that would occur if PCB’s, or other contaminants present at the site, migrated into local surface water bodies or the subsurface aquifer.

The environmental tasks included installation of soil borings, groundwater monitoring wells, geotechnical assessment, and percolation tests; preparation of complete construction and remedial design documents; solid and hazardous waste remedial design, including PCB remediation; solid/municipal waste management; stormwater management and permitting; and extensive coordination with town, state, and federal regulatory agencies.

fortino small 2

Project Features

  • Infrastructure Design
  • Environmental Permitting
  • Landfill Remediation
  • Stormwater Management
  • Wetland Surveys & Delineation
  • PCB Remediation
  • ROW & Boundary Survey
  • Digital Terrain Modeling
  • Utility & Drainage Surveys
  • GPS Technology & Methodology
  • Photogrammetric Control

Experience The Shumaker Difference Today!

Contact Us